Attached is a picture of my dog harnessed to my trike. The harness is designed to attach to the vertical pole of a 2-wheeler. Trikes don't have a similar pole of the same diameter. I attached it to the seat frame back bars on my Rover. But, it continues to fall down. The harness bar is extremely heavy and falls mainly from it's weight. Attached vertically, it would not be able to fall.
The only near vertical poles on the Rover are the handlebars and the seat side frame. I would have to cut through the seat covering to attach it to the seat frame and I just bought a new seat cover so that won't happen. I also could attach it to the handlebars but mine are modified with the weld in the middle and I don't want to screw that up. I thought about putting some type of support around the weld to protect it but I'm not sure where to get one.
Does anyone have any other suggestions on where to attach the harness? It needs to be above the dog to attach to his harness and not injure him the pole needs to be an inch or larger in diameter.