Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

carguy

Has anybody experienced frame twist at the rear wheel yoke or fork joint? on a rambler with 26 inch rear wheel?

About

Username
carguy
Joined
Visits
82
Last Active
Roles
REGISTERED

Comments

  • I have a two-year-old Sportster with all the goodies on it. As I am approaching eighty I am considering a converting to electric the bigger the better. has anyone done this conversion? If so what problems arose?
  • This in response to the chain problem and the leg suck issue. I have had my Rambler for a little better than a year and 3000 miles. Had some issue nothing as bad as the leg suck accident. On the chain issue, If you are a little bit mechanical you ca…
  • I made a gauge that fits the rim. It locates the center of the wheel so I can check front and back for parallel with the datum, that being the frame. Once complete it is just a mater of bringing in the front wheels to the tow in position. Works like…
  • I checked the rear wheel for loose spokes and alignment, I also run about 80 lbs pressure in the tire and a 110 in the front. Good suggestion on the twisting action. This all started when I moved my seat back and realigned the front wheels with a li…
  • I just started posting on this site. I am a new trike rider and will soon be 76. I have found the forum to be very helpful. I have collected some really good suggestions good applied some of what has been discussed, or suggested. Great forum. I ha…
  • I changed over to Shimano clipless peddles and sandles the other day. I never thought that any thing like these could make such a huge difference. I don't need to reposition my feet every time I hit a bump, what aconcept. Highly recomend these regar…
  • Well I did some more fine tunning to my rambler. Tightened the steering/king pins. I did this based on some information I read on another forum. I wanted to know more about steering erregularities. Most of the articles were written by people exceedi…
  • Thanks for the comments and suggestion I will followup on them. I am going to make a precission alignment fixture to remove the variables. Note: most people probably don't think of this but wheels set is a paralell alignmen configuration splay out i…